P,M,K,N,S,H Material GROUPS IN MACHINING คืออะไร

P,M,K,N,S,H Material GROUPS IN MACHINING คืออะไร

ISO MATERIAL GROUPS IN MACHINING

ISO Material Groups Chart การเลือกใช้ให้เหมาะสมกับวัสดุ

สัญลักษณ์วัสดุที่ทำงานได้
Steel
Stainless Steel
Cast Iron
Nonferrous
Superalloys
Hardened Steel

 

     ISO P – STEEL  Steel is Iron (Fe), เหล็ก คือ เหล็ก (Fe) โดยเพิ่ม 0.1 – 2.5 wt. % ของคาร์บอน (C) นอกจากคาร์บอนแล้ว เหล็กกล้ายังอาจมีองค์ประกอบเจืออื่นๆ อีกมากรวมเป็นประมาณ 20% เหล็กบริสุทธิ์มีความแข็งน้อย เหล็กกลายเป็นเหล็กกล้าได้โดยการผสมและปริมาณของธาตุต่างๆลงไป
 
Carbon Steel: เหล็กกล้าคาร์บอน: เหล็กกล้าคาร์บอนเป็นเหล็กรูปแบบที่ง่ายที่สุดและถูกที่สุด มักถูกกำหนดให้เป็นเหล็กกล้าที่ทำจากเหล็ก (Fe) โดยมีคาร์บอน (C) เติมเล็กน้อย แต่ไม่มีส่วนประกอบเจืออื่นๆ การจัดกลุ่มย่อยจะทำตามปริมาณคาร์บอน
Free-Cut Steel: Free-Cutting Steel เป็นชื่อเล่นของเหล็กกล้าคาร์บอนที่มีปริมาณซัลเฟอร์ ตะกั่ว และฟอสฟอรัสเพิ่มขึ้นเพื่อจุดประสงค์เดียวในการปรับปรุงความสามารถในการแปรรูป
Low Alloy Steel: เหล็กกล้าคาร์บอนที่มีองค์ประกอบเจือเพิ่มเติม (ด้านบนของคาร์บอนและแมงกานีส) มากถึง 5% องค์ประกอบเหล่านี้ถูกเติมเพื่อเพิ่มความแข็งแรง ความเหนียว ความต้านทานการกัดกร่อน ความต้านทานการสึกหรอ และความสามารถในการชุบแข็ง
High Alloy Steel (Tool Steel): เหล็กกล้าอัลลอยด์สูงสามารถมีองค์ประกอบผสมธาตุต่างๆลงไป 5-20% เรียกว่าเหล็กกล้า เนื่องจากส่วนใหญ่ใช้ในการผลิตเครื่องมือสำหรับการตัด คัตติ้งทูล cutting tools ต่างๆ
 
     ISO M – STAINLESS STEEL  เหล็กกล้าไร้สนิม (Stainless Steels) ตามชื่อเรียก คือกลุ่มของโลหะผสมเหล็กที่มีลักษณะแวววาวและทนทานต่อการกัดกร่อนได้ดี องค์ประกอบพื้นฐาน (70-80%) คือเหล็ก (Fe) ที่มีโครเมียมขั้นต่ำ 10.5% เกรดส่วนใหญ่จะมีองค์ประกอบเจือปนเพิ่มเติม เช่น นิเกิล (Ni) และโมลิบดีนัม (Mo)
 
     ISO K – CAST IRON Cast Iron is a group of Iron- Carbon-Silicone materials with 1.8-4% carbon (C) and 1-3% of Silicon (Si) content. The silicon pushes part of the carbon out of the solution, forming graphite flakes. The material is brittle at room temperature but has a low melting point and thus has excellent castability. Each subgroup contains different alloys at a wide range of hardness. The hardness has a major effect on machinability, and therefore we compare all the subgroups at 230 HB.
 
     ISO S – SUPER ALLOYS Superalloys are a group of materials engineered to have very high strength and superb corrosion resistance. Some of them also preserve these properties at very high temperatures and chemically hostile environments. They are mainly used in jet engines, turbines, oil&gas equipment, and medical implants.
 
     ISO N – NONFERROUS Nonferrous refers to materials that do not contain any Iron (Fe). Non-ferrous have inferior mechanical properties when compared to steel. However, they can be machined much faster and therefore reduce the cost of the component.
 
Copper / Brass – Has the highest maintainability rating.
Aluminum – Used to reduce weight and reduce machining costs.
Plastics – Low-friction, high-wear resistance, electrical insulation, chemical resistance to solvents.
 
     ISO H – HARD STEEL Alloy steel and cast iron heat-treated to 45-65 HRC. Maintainability is very low and depends mainly on the hardness.
 

เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้